Description
Specification:
APP wireless bluetooth control (IOS and Android)
16 million colors (RGB), 29 lighting modes
Smart DIY color function
6-in-1 design with 8 meters (315 inches) transparent tube and fiber optic
LED bead type: SMD 5050
Super bright LED beads and light guide
Working voltage: DC 12V
Little heat, low energy consumption, long service life
Feature:
[APP Control& Sound Active Effect]: This car LED interior light strip controls 16 million light colors and 29 modes changes via APP wireless Bluetooth, available for IOS or Android system. And this car interior light with sound sensor, the light can be synchronized with music rhythm, giving you a different sense of rhythm.
[16 Million Colors& 29 Glow Modes]: This automotive LED interior light comes with multiple glow colors (RGB) and glow modes that can be adjusted according to the lighting effect you want to create or your preference, giving you or your partner or friend a variety of atmospheres such as manic, frenzied or romantic and sweet.
[Product Usage Instructions]: The working voltage of this car interior light strip is DC 12V, low heat generation and low consumption, with car charger (with fuse). Installation can be done according to the instructions and through the tools provided.
Application:
The product is very easy to use and is suitable for almost all car models. It can be used for RVs, campers, trailers, cars, trucks, SUVs, ATVs, boats, golf carts, etc. Come and add a more beautiful atmosphere to your car!
Installation Steps:
1. Determine the location in the car where you want to install it.
2. Measure the length of the part to be installed, then cut the same length on the optic fiber and the transparent tube.
3. Pass the cut optic fiber through the transparent tube from step 2.
4. Install the transparent tube with fiber optic in the location where it needs to be installed (use the included tool to pry open the slit in the location to be installed).
5. Link the light strips to the transparent tube installed in step 4.
6. Other locations in the car that need to be installed just repeat the above steps.
7. Place the wires and LED lights in the appropriate location (can be hidden in the center console, under the footrest or other places).
8. Connect the cig lighter/USB to the controller, power up.
Notes 1:
If the optical fiber and transparent tube are installed at sharp corners, please minimize the abrasion of the optical fiber.
Notes 2:
If the length of a section of optical fiber used during installation is long, it is recommended to install a light strip (RGB LED beads) at each end of the fiber to increase the brightness.
APP Connection Steps:
1. Scan the QR code on the controller to download the APP.
2. Turn on your cell phone bluetooth.
3. Power up the light strip.
4. Open the APP and connect the light (connect in this APP).
